CampusDown

Home › Guides

Concept

Itchy Eyes in Your New Home? Sick Building Syndrome, Indoor Air Pollutants and How US and UK Rules Tackle Them

CampusDown Editorial · 2026. 10. 28. · Updated 2026. 11. 09.
Generic AI wording will not get you ahead.Find original angles for your work on CampusDown.
Key takeaways
  • New home syndrome is mainly linked to formaldehyde and VOCs released by furniture and building materials.
  • Indoor pollutants include gases such as carbon dioxide, nitrogen dioxide, radon and VOCs, plus particles like asbestos and fine dust.
  • The US and UK combine product limits, building codes and radon advice, and residents can help with bake-outs and ventilation.
Contents
  1. Why should indoor air get its own attention?
  2. What actually pollutes indoor air?
  3. What causes new home syndrome?
  4. How was the study designed?
  5. How do US and UK rules handle formaldehyde, ventilation and radon?
  6. What should you do before and after moving in?
  7. FAQ

Sick building syndrome, often called "new home syndrome" when it hits right after moving in, is the cluster of stinging eyes, scratchy throats, headaches and fatigue that people report in freshly built or renovated spaces, usually linked to chemicals such as formaldehyde and volatile organic compounds (VOCs) given off by furniture and building materials. We check outdoor pollution apps every morning, yet most of us spend the majority of our day indoors and rarely think about the air there. This guide explains what pollutes indoor air, why new homes are the worst offenders, and how American and British rules on ventilation, formaldehyde and radon compare.

Why should indoor air get its own attention?

The study this article is based on starts from a simple observation: most people know that outdoor air pollution harms health and the environment, but pay far less attention to the air inside their homes. It therefore sets out to examine how indoor air quality affects health, and how that effect varies with a person's physical characteristics, such as age or existing respiratory conditions.

The US Environmental Protection Agency has long pointed out that Americans spend roughly 90 percent of their time indoors, and that concentrations of some pollutants can be higher inside than outside. If the home is where you spend the most hours, then checking its air is a reasonable first step in looking after your health.

In other words, the forecast you should be watching may be the one for your living room rather than for your city.

Ad

What actually pollutes indoor air?

The study sorts indoor air pollutants into two broad families: gases and particles. One of the particle types, fine particulate matter, is a concern indoors as well as outdoors, especially from cooking, candles and wood stoves.

  • Gases: carbon dioxide, nitrogen dioxide, radon and volatile organic compounds
  • Particles: asbestos and fine particulate matter

Each pollutant comes from different sources and behaves differently, so the study treats understanding how each one is released as a core task. That variety also means no single gadget or habit can keep indoor air clean; each cause needs its own fix.

Skimming the section headings first makes a long guide much easier to map out. Try writing down one question of your own as you read.

What causes new home syndrome?

According to the study, formaldehyde and VOCs released in large amounts from furniture and building materials are the best-known culprits. That is why the problem shows up in brand-new houses, freshly renovated flats and rooms full of new flat-pack furniture: pressed-wood boards, glues, paints, varnishes and new carpets all keep "off-gassing" for weeks or months.

Painterly illustration of an American family on moving day in a brand-new house among cardboard boxes: the mother rubs itchy eyes, the father coughs while opening a window and a child holds her nose, with a box marked MOVING DAY, by CampusDown
That new-house smell is partly chemistry (CampusDown)

So tackling the syndrome means looking beyond symptoms to what is coming into the home in the first place. Asking what a sofa, a kitchen worktop or a floor finish is made of matters as much as opening a window.

How was the study designed?

The research reviews how housing is classified and what laws apply, then uses published literature to identify pollutant types, their sources, ways to reduce them and the standards used to manage them. It then looks at technology development and management practices at home and abroad to propose improvements and check their effect.

In short, it runs in three stages: survey the current situation, understand how pollutants are emitted, and design improvements whose effect can be verified. That simple loop, find the problem, reduce the cause, confirm it worked, is a good template for any report on the topic.

Ad

How do US and UK rules handle formaldehyde, ventilation and radon?

Unlike outdoor air, private homes in the United States have no single federal indoor air standard. Instead, protection comes in pieces. Under Title VI of the Toxic Substances Control Act, the EPA set formaldehyde emission limits for composite wood products such as plywood, particleboard and MDF, modeled on stricter California rules; compliant products carry a label. In workplaces, the Occupational Safety and Health Administration has a formaldehyde standard with exposure limits and monitoring duties. Office workers who complain of headaches in sealed, air-conditioned towers are the classic sick building syndrome case that researchers began describing in the 1970s and 1980s.

Painterly illustration of a tired office worker holding her head at her desk in a sealed glass office while a colleague fans himself with a folder, with a sticky note reading FRESH AIR? on her monitor, by CampusDown
Sealed windows and busy schedules: the classic office version of the problem (CampusDown)

In England, ventilation in new homes is governed by Approved Document F of the Building Regulations, updated in 2021 alongside tougher energy rules, because airtight, well-insulated houses need deliberate ventilation to avoid trapping pollutants and moisture. Damp and mould became a national issue after the death of two-year-old Awaab Ishak in Rochdale in 2020; the resulting "Awaab's Law" requires social landlords to investigate and fix serious hazards within set timeframes, with the first duties taking effect in 2025.

Radon is handled separately. The EPA recommends fixing a home at or above 4 picocuries per liter, which is about 148 becquerels per cubic meter, while the UK Health Security Agency uses an action level of 200 becquerels per cubic meter and publishes maps of high-radon areas such as Cornwall and Devon.

Indoor air reference points: US, UK and Korea compared
ItemUnited StatesUnited KingdomKorea (new apartments)
FormaldehydeEmission limits on composite wood (TSCA Title VI); OSHA limits at workGuidance values; WHO 0.1 mg/m³ guideline widely usedRecommended 210 µg/m³ or less
RadonAct at 4 pCi/L (about 148 Bq/m³)Action level 200 Bq/m³Recommended 148 Bq/m³ or less
VentilationMostly state codes and ASHRAE standardsApproved Document FMechanical ventilation in new apartment blocks
Damp and mouldLocal housing codesAwaab's Law for social housingHandled mainly through building management

The comparison shows a common thread: every country mixes product standards, building codes and advice to residents, because indoor air is shaped by both what we build with and how we live.

What should you do before and after moving in?

Emissions are highest in the first weeks and months and then decline, so early action pays off. One widely discussed technique is the "bake-out": close up the empty home, turn the heating up for several hours so materials release chemicals faster, then open all windows to flush the air out, repeating a few times. Never stay inside while doing it.

  • Ventilate daily, ideally with cross-breezes, and keep any mechanical ventilation running with clean filters
  • Unwrap new furniture and let it air out in a garage or well-ventilated room for a few days
  • Choose low-VOC paints and products labeled as meeting formaldehyde emission rules
  • Use the cooker hood every time you cook, since gas hobs add nitrogen dioxide and particles
  • Keep humidity around 40 to 60 percent; heat and damp increase formaldehyde release, while very dry air irritates eyes and airways
  • Test for radon if you live in a known high-radon area, especially in basements and ground floors

Houseplants are lovely, but the famous NASA plant study was done in small sealed chambers, and later research suggests you would need an unrealistic number of plants to match ordinary ventilation. Treat them as a mood booster rather than an air purifier.

Why is radon worth testing for?

Painterly illustration of a curious homeowner kneeling in a lamp-lit basement placing a small RADON TEST box on the floor while her teenage son holds a flashlight and smiles, by CampusDown
A cheap test kit answers a question your nose never can (CampusDown)

Radon is a natural radioactive gas that seeps from soil and rock, and sometimes from building materials. It has no color or smell, yet the World Health Organization's cancer agency classifies it as a Group 1 carcinogen, and it is regarded as the leading cause of lung cancer after smoking. It enters most easily through basements, ground floors and cracks in the slab, which makes inexpensive home test kits, widely sold in hardware stores, a sensible purchase in risky areas.

If symptoms persist, see a doctor rather than putting up with them. Sick building symptoms can look like allergic rhinitis, conjunctivitis or worsening asthma, so a simple diary of when and where symptoms flare, and whether they ease when you are away from home, gives your doctor valuable clues.

To sum up, new home syndrome is largely manageable with attention in the first months: bake-outs, steady ventilation, airing out furniture and radon checks. If you are writing an assignment on improving indoor air, pair those everyday habits with the regulatory standards above and your recommendations will be far more convincing.

Reference: Jones, A. P. (1999). Indoor air quality and health. Atmospheric Environment, 33(28), 4535–4564, a review of indoor pollutants and their health effects.

Ad

FAQ

What causes sick building or new home syndrome?

Mainly formaldehyde and volatile organic compounds released by new furniture, pressed-wood boards, glues, paints and other building materials.

Does the US have an indoor air standard for homes?

There is no single federal standard for private homes; protection comes from formaldehyde limits on wood products, workplace rules and EPA guidance such as radon advice.

What is Approved Document F in the UK?

It is the part of the Building Regulations in England that sets ventilation requirements for new and altered buildings.

What radon level should I worry about?

The US EPA recommends fixing homes at 4 pCi/L or above, and the UK uses an action level of 200 Bq/m³.

Do houseplants fix indoor air pollution?

Not on their own. Research suggests you would need far more plants than is practical, so ventilation remains the main solution.

Ad

Found this helpful? Share it

Send it to a friend who needs it.

X Facebook Threads